08/22/2025
11 Romex wires fed through2 inch protective sleeve
Whole house rewire and panel upgrade. Panel is surface mounted on exterior wall.
Attic and crawlspace available.
Electrician ran three romex wires in 2 inch conduit from attic to breaker panel in PVC sleeve (about 3 feet total) and eleven romex wires from the crawl space up to the panel also in 2 inch protective sleeve. The sleeve that these 11 wires are in measures 26 inches, not including connectors.
Was this okay? I reached out to the electrician to see what he says/ how he explains it but I would like to know if this is correct or not here just in case he attempts to gaslight me. He has not responded yet. Passed inspection for panel upgrade and rewire but inspector did not see that it was Romex in the protective sleeves, or how many wires were in the protective sleeves.
Whole other issue is that it's Romex...in protective sleeve...on home exterior feeding directly into electrical panel. What are your thoughts on this part too? Located in Socal.
Appreciate any insight 🙏🏼
