02/08/2026
Y’all might want to check all of this BEFORE everyone shows up just to be safe.
🏈 SUPER BOWL SUNDAY + SEPTIC PROBLEMS? READ THIS BEFORE YOU PANIC 🚽
House full of people. Toilets acting up. Game about to start. Here’s a quick DIY diagnostic guide for a conventional septic system 👇
🚨 TOILET WON’T FLUSH OR IS BACKING UP?
CHECK THE INLET SIDE OF THE SEPTIC TANK
• Open the inlet side lid
• Look at the inlet baffle
• If the inlet baffle has a noticeable clog, carefully poke it (shovel handle, stick, etc.)
• Have someone flush the toilet and watch the water enter the tank
✅ If it starts flowing again, you just bought yourself some time until a pumper can come out
⸻
INLET BAFFLE LOOKS NORMAL AND WATER LEVEL INSIDE THE TANK LOOKS NORMAL?
That means the issue is likely between the house and the tank
CHECK YOUR CLEANOUT
• Slowly loosen the cap (it may be under pressure)
• If water comes out, the clog is between the cleanout and the septic tank
• Try running a snake towards the septic tank
❗ If it keeps happening, call someone with a sewer camera or drain cleaning equipment
⸻
🚫 CLEANOUT IS EMPTY?
That points to a plumbing issue under the house
• Try a plunger or snake
• If that doesn’t work, call a plumber
⸻
🌊 OPEN THE SEPTIC TANK AND WATER IS COVERING THE INLET OR OVERFLOWING?
Move to the outlet side lid
CHECK FOR AN OUTLET FILTER
• If there is a filter, VERY slowly lift it just enough to let water pass
• Go slow so you don’t let solids free-flow into the drainfield
• Once the water level returns to normal, fully remove the filter
• Rinse it into the inlet side of the septic tank
• Reinstall the filter
⚠️ NO FILTER?
That likely means a drainfield issue
• The system needs to be pumped
• The drainfield should be evaluated by a septic professional
⸻
Save this. Share it. Tag the Super Bowl host.
Too many wings + too many flushes = bad Sunday 🏈🚽
