North River Electric Inc.

05/28/2020

As the temperature starts to rise, make sure to prepare your air conditioner for summer. Here are a few steps you should take to make sure your unit is ready.

1. Replace the filter
2. Check the ductwork
3. Clean the condenser and coils
4. Check coolant lines
5. Make sure its on a dedicated circuit

Once you have double checked to make sure all the essential maintenance is taken care of, test and make sure the air conditioner runs smoothly.

Then don't forget to set the thermostat over to "cool"!

05/18/2020

Did you know every year around 70 people die and over 350,000 are seriously injured by electrical accidents in the home caused by botched DIY jobs?

Here are the top 5 tips for electrical DIY

1) Locate cables in your wall. A common DIY error is accidentally drilling, nailing or screwing into cables hidden inside your walls.

2) Use a RCD (residual current device). A RCD can save your life by cutting off the power in the event of an electrical fault caused by a DIY blunder.

3) Shut off the power. If you're doing any work near electrical wiring or power supplies, where possible, shut off the power in your fuse box and use battery powered tools.

4) Check power tools and watch out for the lead. Before using any power tools, check the lead and plug are in good condition.

5) Get advice from a registered electrician. The best way to avoid any electrical problems in the home is to seek the advice of a professional. If you're not sure, don't DIY.

05/12/2020

What to do when you loose power during a storm:
1. Keep freezers and refrigerators closed
2. Maintain food supplies that do not require refrigeration
3. Avoid carbon monoxide poisoning
4. Check on your neighbors
5. Go to a community location with power if heat or cold is extreme
6. Turn off or disconnect appliances, equipment, or electronics.

05/04/2020

One of the many back up generators installed by North River Electric

04/16/2020

One of the current jobs we are working on in Roseburg

04/12/2020

Happy Easter weekend everyone

04/12/2020

01/09/2019

3 Tips to Prevent Electrical System Fires https://vlnk.io/2D0MoPC

04/04/2018

3 Details You Should Know About Specialty Lighting

Whether you’re remodeling or simply looking for an easy way to change the ambiance in your home, specialty lighting is an excellent route to consider. While many people assume interior lights are only for functional purposes, you can also use them to create a fresh new aesthetic. For example, dimmers can be added to create a softer, nighttime atmosphere. Or, for the cost-conscious homeowner, LED lights provide consistent, energy-efficient illumination.

Below are three details you should know about how specialty lighting can bring your home to life:

Adds More Style: Outdated lighting fixtures make even the most modern home look shabby. If you’ve had the same sconces and overhead lights in your house since the day you moved in, consider specialty lighting instead. Available in a wide variety of colors and styles, you can choose a model that not only illuminates your high-traffic areas but will also bring a touch of class and sophistication to the room.
Specialty Lighting Illuminates More Efficiently: Today’s technology makes it easier than ever to get the most out of your residential lighting. LED options are readily available and widely renowned for providing unrivaled efficiency. Upgrading to specialty LED lights will keep your home brightly lit for longer and for a fraction of what you’d pay over time with incandescent lights.
Creates Softer Light: Not every room in the house needs to be full of bright, white light. Specialty lighting is designed to give you more control over the type of light you bring inside. Soft bulbs, dimmers, angled lights, and under-counter fixtures produce a more gentle glow to the room so you can enjoy a peaceful, relaxing feeling.

03/29/2018

5 Hazards of Handling Electrical Installation on Your Own

As a homeowner, you take pride in your house. When something goes wrong, your first instinct might be to make repairs on your own. While you can perform many DIY fixes on your own, electrical installation and residential wiring work are best left to the professionals. By entrusting the team at North River Electric in Roseburg, OR, for the job, you can avoid some of the dangers of electrical work.

1. Electrocution
The most common safety hazard associated with DIY residential wiring work is electrocution. Without the right training and know-how, you may inadvertently cross the wrong wires, sending the electrical current into your body rather than the outlet. Professional electricians have the necessary training to work with live wiring without injuring themselves or doing damage to your home.
2. Fire
Incorrectly wiring a home can increase the risk of sparks and improper heat transfer, which leads to house fires. Electricians have the right skills and techniques to ensure the wiring is installed safely, reducing the risk of fire or overloaded circuits.
3. Violations of Building Codes
To be up to code, your wiring must meet a strict set of safety requirements. Unless you’re familiar with proper electrical installation techniques, there’s a chance your home will fail to meet these standards. This can make it difficult for your home to pass an inspection should you wish to sell it in the future.
4. Increased Frequency of Repairs
Electricians install and repair residential wiring on a daily basis. This means they’ll install lighting or fix an outlet problem correctly the first time. If you handle the work yourself, you could do long-term damage to your home’s electrical system, resulting in more expensive and frequent repairs in the future.
5. Using the Wrong Supplies
Wiring, outlets, and circuits are designed with specific purposes in mind, and what works in your living room may not be adequate for your kitchen. Unless you have a firm understanding of the electrical needs of all your appliances, you may inadvertently install the wrong product. Professionals know which type of wiring works in specific areas and can guarantee the system will handle your electrical demands with ease.
Let the team at North River Electric take on your home’s electrical installation projects, whether you’re remodeling your kitchen or replacing damaged outlets. Their dedicated crew has over 35 years in the industry and believes every homeowner should have reliable and safe wiring, no matter how new or old the structure is. Learn more about our services by visiting the website, and call (541) 673-0800 to schedule a free, no-obligation estimate today.

03/27/2018

3 Reasons to Call an Electrician
1. Cost Savings
Many people attempt DIY repairs to save money. However, it often ends up costing more than if you’d hired a professional in the first place. Insurance companies typically don’t cover repairs or damage done by unlicensed individuals, meaning you’ll have to pay to fix any mistakes. When you work with a professional, you can have confidence the job will be done well. Also, most electricians are insured, so if something goes awry on the job, you aren’t liable to pay for it.
2. Safety
Working with electricity is dangerous if done without proper safety precautions. If you don’t know what you’re doing, tinkering with wires and sockets could lead to electric shock, fire, or structural damage. Professionals undergo extensive training to learn how to perform electrical installations and repairs safely. Not only do they protect you from injury, but they also ensure your home is hazard-free.
3. Expert Knowledge
Many local and state codes are in place regarding electrical work. These most often apply to homebuilding and renovation, but they may also refer to wiring, particularly in older or historic homes. Professionals know what permits to obtain and how to meet the regulations. Also, after addressing urgent issues, they’ll ensure no other problems need attention. No detail is overlooked when you hire an electrician.

It’s not worth the risk to attempt electrical installation or repair yourself. Instead, rely on the professionals at North River Electricin Roseburg, OR. The full-service company has provided wiring services since 1981, and they will even handle specialty lighting and solar installation. Call (541) 673-0800 to schedule an appointment, or visit their website for details about their services.