Samson Marine Construction

07/15/2022

Pre-wrapped duro sleeve piles for a long rot free life in the water.

02/03/2022

02/03/2022

Here’s another great decked lift 16x30 ft. These are a better option vs floating docks in Florida. The deck can change its pitch and roll and be lowered into the water to launch jet skis kayaks or to just be able to put your feet in the water.

This deck has bunks for 2 jet skis and a double kayak rack as well as 8 ft long dock box for storage. The lift is a Hi-Tide 9,000 lbs T2 Topless. As always the piling have driven to a proper depth for long term stability (15ft here) and hammered with an 800 lbs pneumatic hammer to guarantee the piles will not settle or shift in the future.

When storms are approaching these lifts can be raised up and secured which makes them much less likely to be damaged or removed from rough water and wind like a floating dock.

10/28/2021

Good morning 😁

10/17/2021

14 ft seawall panels with cool grey composite WearDeck cap, as always stainless hardware and straight lines.

10/17/2021

24,000 Hi-Tide X2 with custom bunks for a 39 Invincible. If you have a stepped hull boat you must get the support bunks that fit your boat in order to prevent excessive wear or damage.

10/17/2021

WearDeck dock with 16,000 Hi-Tide lift with angled lift beams to compensate for shallower water closer to seawall. Dock is built to house future 33 ft center console

10/17/2021

Grant dock

10/17/2021

Roseland dock with 2 story deck around house. Stainless wire back handrails to keep that view and a 6,000 lbs Hi-Tide lift

10/17/2021

20,000 lbs lift sitting on 12 in diameter piles driven 15 ft into the ground for guaranteed support.

10/17/2021

190 ft dock just completed in Grant