07/20/2026
🔥🔥XBC7 GEN2 PISTON DRIVE🔥🔥
🚩🚩ZERO DOLLARS DOWN🚩🚩
🚩🚩0% FOR 18 MONTHS🚩🚩
⭐️High flow now available⭐️
The popular gen2 xbc7 now available in piston drive! Features a bent axis piston motor for even better performance, higher blade speeds, more torque and faster recovery.
Sold by EXTREME IMPLEMENTS, LLC
⭐️⭐️⭐️336-870-2257⭐️⭐️⭐️
☆☆☆☆PRICING☆☆☆☆
Standard flow 17-30gpm
60"'--$6,999
72"--$7,199
78"--$7,599
⭐️High flow 30-50gpm⭐️
60"--$7,999
72"--$8,199
78"--$8,599
Flat rate shipping $499
☆Powerful BENT AXIS PISTON MOTOR
☆17-30GPM Standard flow
☆30-50gpm high flow
☆12 carbide tipped replaceable mulching teeth
☆Fully serviceable bearing housing replaceable seals and bearings
☆Angled deck sides allows for better flow of material
☆Raised deck back to allow for much greater clearing of material
☆cuts within 1"-2" of ground level
☆Top side blade bolt access hole, for quick & easy blade changes
☆Single layer SOLID 5/8" 🇺🇸 steel blade holder
☆3/8" thick pushbar
☆3/8" thick rear deck plate
☆Wire wrap protection
☆Bearing seals completely protected
☆1/2 bolt on/replaceable skid shoes
☆7" diameter cutting capacity
☆Open front design with pushbar
☆1-way h-valve protects motor from accidental reversals
☆Hoses routed inside hookup plate to prevent tears
☆Kevlar-style hose protection sleeve
☆5/8" AR400 hardened steel blades
☆Replaceable bolt on skid shoes
☆Slotted HD motor cover to increase airflow and hydraulic cooling
☆Universal skidsteer hookup
$499 flat rate shipping does NOT apply to the following locations: CA, WA, OR, MT, WY, NM, CO, ID, UT, NYC, LONG ISLAND, UPPER PENINSULA, ND, SD, AZ, AK, HI, NV, TX, IA, OK, NE, KS, AR, or any other locations determined to be high costs service areas by ltl trucking companies. For a quote to these locations please call or message us with your zip code.
THIS IS AN ALL AMERICAN MADE PRODUCT, NOT LIKE OTHERS THAT USE CHINESE STEEL, BLADES, HYDRAULICS ETC...AND ONLY ASSEMBLE THEM IN THE US. THIS CUTTER IS MADE IN 🇺🇸 FROM START TO FINISH!!!
FAQ'S
Does this brush cutter really cut 7" trees?
Yes! In fact, in some of the manufacturers demo videos, they cut hardwoods up to 12" diameter, remeber those are demo videos the cutter is rated up to 7"!!! This cutter is rated from the manufacturer to consistently cut 7" diameter hardwood trees all day, every day! This is a commercially rated brush cutter, using a time tested and proven hydraulic motor and bearing housing setup. We have many commercial land clearing customers, who have told us about using these cutters commercially 7 days a week clearing 5"-10" trees. Many customers have reported cutting much larger trees with this cutter, but please keep in mind, the manufacturer rates and warrants this cutter for up to 7".
Will this brush cutter also cut grass and overgrown fields, and how well does it do compared to a 3 point rotary cutter?
Yes, this brush cutter will perform double duty, cutting larges trees and grass/overgrown fields. Many customers tell us they use one side of the bi-directional blades for trees and brush, and use the other side for grass/fields. This method keeps the side used for grass sharper for a longer period of time allowing the cutter to mow fields efficiently. This brush cutter leaves behind a clean cut comparable to that of traditional 3 point rotary cutters. In the picture that is in this ad of a path that was mowed threw an overgrown field, that hadn't been mowed in 2 years, a single pass was performed in thick & tall grass/weeds.
What is a case drain, and do I need one for this cutter?
This cutter does require the use of a case drain line, which is included.
Does this brush cutter require high flow hydraulics?
Both standard flow and high flow options are available. Standard flow 17-30gpm and high flow 30-50gpm
Can i sharpen the blades, and how or what method should I use?
Yes, the AR400 blades can be sharpened to give extended blade life! To sharpen the blades, you can rotate the blade to the front of the cutter, and swing it out, exposing it from the deck. Then use an angle grinder to re-sharpen. Simply hold the grinder at the same angle that the blade was originally sharpened to.
Where can I get replacement blades, and how much are they?
Replacement blades can be purchased from us, or direct from the manufacturer (Carolina Attachments, LLC). We keep replacement blade kits in stock at all times. There is an ad posted in out Ebay store for replacement blades. Blades can not be purchased from your local farm supply store, because they are cut in house by the manufacturer. Full replacement sets (3 blade cutters) are $450 plus shipping. Many customers buy an extra set of blades at the same time as the cutter, to save the added shipping cost of the blades.
What does the 1 year warranty cover?
The manufacturer warrants this cutter to be free from manufacturer defects for 1 year from the purchase date. This warranty covers, but is not limited to, all components excluding wear parts I.E(blades and hydraulic hoses).
