Northwest Mobile Blasting LLC

Call Directions Website Contact the business

Northwest Mobile Blasting LLC A Mobile Sandblasting business that covers Eastern Washington and Northern Idaho.

Blasted and painted this logging trailer and reach at the shop in Troy, ID. Total blast time was 4 hours. Painted with...
10/21/2026

Blasted and painted this logging trailer and reach at the shop in Troy, ID. Total blast time was 4 hours. Painted with Sherwin Williams Industrial Coatings.

Winter is on its way. Get your projects started now.1977 MG Midget convertible blasted and primed. Total blast time wa...
10/06/2026

Winter is on its way. Get your projects started now.

1977 MG Midget convertible blasted and primed. Total blast time was 4 hours. Primed with Valspar FP-420 epoxy primer

1970 Ford F100 frame, suspension components blasted. Total blast time was 2 hrs

Another return trip to Lapwai, ID for Nez Perce Fire & Forestry. Blasted and painted this double bunk hay stacker. Bla...
10/02/2026

Another return trip to Lapwai, ID for Nez Perce Fire & Forestry. Blasted and painted this double bunk hay stacker. Blasting took 3.1 hours. Painted with Sherwin Williams industrial coatings.

Blasted and painted this Kenworth truck frame for Pacific Steel and Recycling in Troy, ID. Total blast time was 5.5 hou...
09/26/2026

Blasted and painted this Kenworth truck frame for Pacific Steel and Recycling in Troy, ID. Total blast time was 5.5 hours. Painted with Valspar FP-420 epoxy primer and top coated with Valspar TB-550 in gloss black. Looking so sweet😎

48’ Aspen lowboy is officially done done for Nez Perce Fire & Forestry in Lapwai, ID. Customer turned over and made wel...
09/18/2026

48’ Aspen lowboy is officially done done for Nez Perce Fire & Forestry in Lapwai, ID. Customer turned over and made welding repairs and another 4.1 hours of blasting to clean it up and then primer and topcoat to finish it off.

Total blast time for this bad boy was 24.1 hours, 8 gallons primer and 9 gallons polyurethane topcoat with a Binks 2.5 gal pressure pot.

Ready for new deck boards, new electrical and put to work🤘

Blasted and primed this 1963 Chevy Nova II convertible. Total blast time was 4 hours. Primed with Valspar FP-420 epoxy...
09/16/2026

Blasted and primed this 1963 Chevy Nova II convertible. Total blast time was 4 hours. Primed with Valspar FP-420 epoxy primer. Customer will now begin the full restoration process it so very much deserves.

Blasted and painted this Peterbilt truck frame, drop axle and rear suspension components and all the crossmembers. Tota...
09/11/2026

Blasted and painted this Peterbilt truck frame, drop axle and rear suspension components and all the crossmembers. Total blast time was 5 hours. Painted with Valspar FP-420 epoxy primer and TB-550 polyurethane in a gloss black. Doesn’t get much better than this👍

Big thanks to Nez Perce Fire & Forestry in Lapwai, ID for the opportunity on their 48’ Aspen lowboy. Total blast time w...
09/06/2026

Big thanks to Nez Perce Fire & Forestry in Lapwai, ID for the opportunity on their 48’ Aspen lowboy. Total blast time was 20 hours which includes the trailer, (4) rims and diesel holding tank. Painted with Sherwin Williams Industrial Coatings.

Customer will flip over and I’ll be back down to finish it completely up.

Blasted and painted this 16’ Circle D gooseneck stock trailer. Total blast time was 7.2 hours. Painted with Sherwin Wi...
08/29/2026

Blasted and painted this 16’ Circle D gooseneck stock trailer. Total blast time was 7.2 hours. Painted with Sherwin Williams Industrial Coatings in. “Ellie Gray” and a gloss white for the accent piece. Also applied Raptor bed liner to the bottom for rock chip protection. Looking brand new again🤘.

A big thanks to Steve Henderson of Pine Creek logging LLC for the opportunity to blast and paint his 50’ Aspen lowboy tr...
08/24/2026

A big thanks to Steve Henderson of Pine Creek logging LLC for the opportunity to blast and paint his 50’ Aspen lowboy trailer.

Total blast time was 15 hours which includes (12) rims both sides . Painted with Valspar FP-420 epoxy primer and top coated with Valspar TB-550 in a silver. Looking so sweet in the sun😎.

Address

4360 Highway 8
Troy, ID
83871

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

+12083011092

Website

Alerts

Be the first to know and let us send you an email when Northwest Mobile Blasting LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Northwest Mobile Blasting LLC:

Shortcuts

Share

Category