Hook Crane Services

Hook Crane Services We are a full service Crane Company with a fleet of 12 cranes.

Every kind of crane work has a season down here. Most people find that out the hard way.October through April Average hi...
08/29/2026

Every kind of crane work has a season down here. Most people find that out the hard way.

October through April
Average highs drop to 86° by October and keep falling. This is the window for long structural sets, steel, and trusses, where crews are on the site all day.

April
Typically the windiest month of the year in Tucson. Wind governs tall boom work more than anything else does. Build slack into anything running high.

May into early June
Driest stretch of the year, averaging under a tenth of an inch of rain. Firm ground and predictable days. It closes June 15 when monsoon starts.

Mid June through September
Monsoon. Early starts, buffer days, and a hard look at the ground before setup.

June through August
Highs run 98° to 101°. This is when rooftop and cooling equipment fails, so the work is urgent instead of planned.

Knowing the window changes what a job costs and how long it takes. We have been reading these seasons since 1978.

Get on the fall calendar
hookcrane.com/ | (520) 323-0963

Two inches of rain in an hour does not just cost you a day; it changes the job site.Graded lots hold water. Wash crossin...
08/27/2026

Two inches of rain in an hour does not just cost you a day; it changes the job site.

Graded lots hold water. Wash crossings soften. Fill that compacted hard in May gives under an outrigger in August. A crane needs firm, level ground under every pad, and after a monsoon storm that is a judgment call somebody has to make standing on the dirt.

We run 14 cranes, so we bring the one that suits the ground instead of the one that happens to be free. Operators are NCCCO and MSHA certified. We have been setting up on Southern Arizona sites since 1978, wet and dry.

Send site details and we will tell you what setup it needs
hookcrane.com/ | (520) 323-0963

The crane is usually the easy part.The hard part is a commercial oven wedged where nothing was designed to lift it. Mach...
08/26/2026

The crane is usually the easy part.

The hard part is a commercial oven wedged where nothing was designed to lift it. Machinery that has to come out of a building through an opening smaller than the machine. A load that has to stay level the entire way or it is scrap when it lands. A packaged unit that has to come off a flatbed and land level on a pad.

One customer had a commercial oven stuck on an elephant stand. We were there within two and a half hours of the call.

That is rigging, and it is a separate skill from running a crane. Our staff includes riggers, drivers, and job coordinators, not just operators. Rigging is one of the four things we build the fleet around, not an add-on to a crane rental.

If something has to come out, go in, or move across a plant floor, the rigging plan determines whether it survives.

Rigging and machinery moving:
hookcrane.com/ | (520) 323-0963

Roughly 90% of Arizona's lightning falls in July, August, and September. Towers sit in the open and take all of it.Storm...
08/21/2026

Roughly 90% of Arizona's lightning falls in July, August, and September. Towers sit in the open and take all of it.

Storm season is when antennas get replaced, radios get swapped, and mounted equipment comes down for repair. The height is what complicates this type of job.

That is what boom length buys you. Reach means the hook gets where the equipment actually is, and it means the crane can sit somewhere safe and stable instead of crowded up against the base of a tower. On a caliche pad at the end of a dirt road outside Willcox or Safford, that difference decides whether the job happens that day.

Our fleet tops out at 165 tons with 260 feet of boom and jib, with 90 and 130 ton machines in between. Cell towers are one of the four things we build the fleet around. Operators are NCCCO and MSHA certified, which matters when the site sits on mine or utility property.

Tell us the tower height and the access and we will tell you the machine you need.

Check out our equipment specs:
hookcrane.com/ | (520) 323-0963

Not every lift happens on an open job site. Sometimes the load is a piece of machinery wedged into a spot it was never m...
07/30/2026

Not every lift happens on an open job site. Sometimes the load is a piece of machinery wedged into a spot it was never meant to leave, and the clock is running.

That is where machine moving and rigging come in. Awkward loads, tight access, and equipment that has to come out in one piece without damage to the machine or the building around it. It takes the right rigging plan, the right crane, and operators who have solved the problem before.

Machinery relocations, equipment set and removal, and rigging on tight sites across Southern Arizona. If there is a way to get it done, our team will find it.

Got a piece of equipment that needs to move? Tell us what you are working with.
(520) 323-0963 | [email protected] | hookcrane.com

Steel er****on is one of the most demanding parts of a commercial build. Beams and columns are heavy, the tolerances are...
07/23/2026

Steel er****on is one of the most demanding parts of a commercial build. Beams and columns are heavy, the tolerances are tight, and the schedule downstream depends on the structure going up cleanly and safely. The wrong equipment or a missed window can set the whole project back.

Hook Crane works alongside contractors on steel er****on, truss and beam setting, and structural lifts across Southern Arizona. We help match the crane to the load and the site, so your steel goes up on time and your crew stays safe doing it.

Bring us in early and we will help you plan the lift around your schedule.
(520) 323-0963 | hookcrane.com

When Arizona's power demand peaks in the summer, the equipment behind the grid has to be ready. A lot of that equipment ...
07/16/2026

When Arizona's power demand peaks in the summer, the equipment behind the grid has to be ready. A lot of that equipment does not get where it needs to go without a crane.

Hook Crane has spent decades placing transformers and generators at power facilities across Southern Arizona, along with pumping equipment at well sites. These are heavy, high-value loads with very little room for error, and they often sit in tight or sensitive locations.

That work calls for the right crane matched to the load and the reach, certified operators, and rigging that is planned before anyone lifts anything. It is exactly the kind of job we have built our reputation on since 1978.

Transformer, generator, or utility component that needs to be set this summer? We can help you plan the lift.

(520) 323-0963 | [email protected] | hookcrane.com

July in Tucson is not the season to improvise a crane lift.Extreme heat changes how a job site runs. Crews tire faster, ...
07/10/2026

July in Tucson is not the season to improvise a crane lift.

Extreme heat changes how a job site runs. Crews tire faster, equipment runs hotter, and the safety margin gets thinner as the afternoon builds. Summer lifts call for planning, not guesswork.

Here is how our team works through the heat:

We start early. Many summer lifts are scheduled at first light, before the worst of the temperatures set in.

We look after our people. NCCCO and MSHA certified operators are trained to manage pace, hydration, and crew safety on demanding sites.

We respect the equipment. Cranes are checked and maintained so heat does not turn into downtime in the middle of your lift.

The result is a lift that stays on schedule and on safety, even in the middle of a Tucson summer.

Planning a July or August lift? Let us get it on the calendar at the right time of day.

(520) 323-0963 | hookcrane.com

07/02/2026

Some job sites you drive past every day. This one you cheer in every fall.

Our cranes were on site at the University of Arizona's football stadium to help set the new stadium lighting going in ahead of the 2026 season.

Placing equipment high above a stadium bowl takes precise rigging, an experienced operator, and the right crane for the reach and the load. It is the same care we bring to every lift across Southern Arizona, whether it is a rooftop unit on a Tucson office building or lights over a field that seats tens of thousands.

Watch our crew put it to work.

Lifting Tucson since 1978.

(520) 323-0963 | hookcrane.com

Arizona's power demand peaks in the summer. The state's utilities set new record highs again last year as cooling load c...
06/25/2026

Arizona's power demand peaks in the summer. The state's utilities set new record highs again last year as cooling load climbed across the region.
That keeps power and water infrastructure running hard. Transformers, generators, and well pumping equipment get placed and swapped, and a lot of that work sits on regulated industrial ground.

Those sites have requirements. Our operators carry both NCCCO and MSHA certification, so we can work the mine and industrial sites that require it.

call (520) 323-0963 or request a quote at hookcrane.com/ .

Address

3418 N Kelvin Boulevard
Tucson, AZ
85716

Alerts

Be the first to know and let us send you an email when Hook Crane Services posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share