Quality Electric Company, LLC

04/02/2026

https://ogden.revfluent.com/bestof/og/1rlvw7z0j5/21nz8peonp

Vote in any or all categories once per day April 1st through April 7th EDT!

10/31/2025

Trunk or Treat with Jon @ Quality Electric

05/15/2025

Kitchens are heavy users of electricity, and code may require 5 or more circuits. Learn the standard requirements for electrical circuits in kitchens.

03/23/2025

We really get into our work. This is not the first time Jon climbed in that cabinet.

11/14/2024

Another quality sub-panel install by Jon Cooper.

10/21/2024

Jon's info board at today's car show.

10/19/2024

While working on a panel today, we noticed that someone had installed sheet-metal screws in place of the stock panel screws. Please don't ever do that. It is incredibly dangerous. The opportunity to run a sheet metal screw into a hot wire is very high. Factory screws are blunt on the end where sheet metal screws are sharp.

10/16/2024

This panel has a #10 aluminum wire feeding the dryer. Personally, I wouldn't recommend it, but beyond that, the wire is bare 2.5" beyond the breaker. That's a great opportunity for someone to get shocked when working in this box. This was on a tract built home. Every buyer should have a home inspection at the pre-drywall stage and at the completion of the construction. This should not have passed any inspection, but sadly, it did.

02/02/2024

Recent 400 Amp Service

12/11/2023

The final meter-stack replacements are done. The last two were the worst of the five, but everything is new and the tenants should have no issues now.

12/11/2023

A recent generator install. This was for a 400 amp service. The transfer switch handles both interior panels in the event of a power outage.