AUTOMATIC OZONE GENERATOR
The Automatic was designed to work on a nightly cycle. The IEC approved timer can be set once, for years of reliable operation. The best practice would be to set up a test-cycle about every two months as described in the user manual. This test cycle is programmed into the main timer to test the ozone generation of your unit. It takes less than 5 minutes to complete the en
tire test cycle. The box is made of steel with a white ferro-finish and weighs 2,5kg. The Automatic utilizes a dual ball-bearing fan for longevity. MANUAL OZONE GENERATOR
The Manual was designed to be used where and when needed and a sanitation cycle can be started manually by selecting the 30min or 60min cycle. The best practice to use the Manual is to connect it to a mains power source in the room/area that you wish to sterilize. Before leaving for the evening, start the generator and close the door behind you. Remember safety comes first. Ozone should not be inhaled directly. The Manual utilizes a dual ball-bearing fan for longevity. Dimensions is (HxBxL): 225mmx225mmx365mm. CAR OZONE GENERATOR
The CAR was designed to be used in the cabin of your vehicle and a sanitation cycle can be started manually by selecting the 30min or 60min cycle. The best practice to use the CAR is to connect it to the cigarette socket and to place it on the passenger seat facing the driver seat to ensure that the front and rear vent are not obstructed. You can then push the start button and close the car door behind you. Ensure the windows are closed. The box is made of steel with a white ferro-finish and weighs 1,5kg. The CAR utilizes a dual ball-bearing fan for longevity. Dimensions is (HxBxL): 85mmx85mmx225mm.
