Sniper Racing Mossel Bay

Sniper Racing Mossel Bay We specialise in custom fabrication, welding and performance parts and engines.

Another beast done right 🔥This next-gen Ford Ranger V6 came all the way from the Northern Cape for a full exhaust upgrad...
24/05/2026

Another beast done right 🔥

This next-gen Ford Ranger V6 came all the way from the Northern Cape for a full exhaust upgrade — and we delivered.

We fabricated a complete 76mm 304 stainless steel exhaust system from front to back, including a custom downpipe and catalytic converter delete for maximum flow and performance. 💨

To top it off, ATM Chiptuning Garden Route handled the tuning, ensuring everything runs safely while making solid power. 👌

Performance. Sound. Quality.
Built properly from start to finish.

📍Get in touch for custom exhaust systems, performance upgrades, and tuning solutions.

More progress on the BMW build 🔥We’ve officially started on the custom plenum intake setup. For the runners, we designed...
17/05/2026

More progress on the BMW build 🔥

We’ve officially started on the custom plenum intake setup. For the runners, we designed and 3D printed a custom jig to press the runner halves into the exact shape needed for a smooth oval-to-round transition — ensuring optimal airflow and precision fitment.

Once all the plates were formed, everything was TIG welded together and attached to the plenum backing plate. We then cut and machined the factory intake to the desired height before welding the entire assembly together.

After that, work began on the plenum itself. We shaped and fully welded it up with strength in mind — making it extra beefy so it’s ready to handle boost when the time comes 💪

To maximize airflow even further, we upgraded the throttle body to a Bosch 82mm DBW unit to complement the new plenum design perfectly.

The sump is currently on the way, and once it arrives we can get the motor fitted and move on to the final stages of fabrication.

Stay tuned — plenty more to come 👀

We started on the load bin on the caddy. Got the main carbon panel in and finished off the holes for the coilovers with ...
17/05/2026

We started on the load bin on the caddy. Got the main carbon panel in and finished off the holes for the coilovers with nice 3D printed trim rings. Just gives it a more "finished" look and some more detail. We just need to fit the four small panels on the corners and the bed is done. Then we doing something different for the tailgate. Will post photos when we start on that.

Stay tuned for more updates. 💥 🏁 💥

13/05/2026

There is just something about a screaming R36. Absolutely just love this thing. 🏁😍

13/05/2026

Sounding healthy 🏁🏁

💥🏁 The secret’s out… it’s Barra time in the BMW 🏁💥We’ve officially kicked off the Barra swap. Keeping it naturally aspir...
07/05/2026

💥🏁 The secret’s out… it’s Barra time in the BMW 🏁💥

We’ve officially kicked off the Barra swap. Keeping it naturally aspirated for now, but boost is definitely on the cards for next year 👀

Today’s progress: – Engine mounts underway ✅
– Main mountings mocked up
– Stripped all unnecessary components

Next steps: We’re waiting on the rear bowl sump from our friends in Australia before dropping the motor in and finalizing the mounts. While that’s in transit, we’ll be cutting the firewall and boxing the crossmember to get everything dialed in.

Also in the works: a custom plenum paired with an 82mm Bosch DBW throttle body 🔥

We’ll be sharing progress pics as we go — this one’s going to be wild.

Stay locked in 💥🏁

🔥 Custom Turbo Setup – Jetta MK2 Sleeper Build 🔥We had a customer bring in his fresh build — a classic fitted with a 1.8...
05/05/2026

🔥 Custom Turbo Setup – Jetta MK2 Sleeper Build 🔥

We had a customer bring in his fresh build — a classic fitted with a 1.8 20v turbo motor — and trusted us to handle the intercooler and boost pipes.

Here’s what we did:

✔️ Mounted the intercooler with custom stainless steel brackets & hardware
✔️ Fabricated 63mm stainless boost pipes
✔️ Installed 6-ply silicone couplers & stainless T-bolt clamps
✔️ Fitted a dump valve
✔️ Built a 76mm induction pipe with a high-flow air filter for maximum airflow and turbo protection

💨 The result? Clean setup, strong airflow, and a solid foundation for performance.

This one’s shaping up to be a proper sleeper build — subtle on the outside, serious under the hood.

🚗 Got a project or upgrade in mind?
We specialize in custom fabrication, turbo setups, and performance builds .

📩 Get in touch and let’s bring your build to life!

💪 Custom Solution, Big Savings – Isuzu KB250 Boost Pipe Upgrade 💪A customer brought in his Isuzu KB250 with a cracked pl...
05/05/2026

💪 Custom Solution, Big Savings – Isuzu KB250 Boost Pipe Upgrade 💪

A customer brought in his Isuzu KB250 with a cracked plastic boost pipe — causing boost leaks and a noticeable loss of power.

The dealership quote for a replacement? 😳 R6000+

So we made a plan…

✔️ Custom-built stainless steel boost pipe
✔️ Durable 6-layer silicone couplers
✔️ Heavy-duty stainless T-bolt clamps
✔️ Built to last way longer than the original

All of this at a fraction of the cost 💥

Result? Restored power, improved reliability, and a very happy customer.

🚗 Need a smart, cost-effective upgrade or repair?
We’ve got you covered — from custom fabrication to performance solutions.

📩 Send us a message and let’s get your car or bakkie sorted!

🔥 Next-Gen Ranger V6 Diesel Upgrade Done Right 🔥We recently had a next-gen Ranger V6 diesel in the shop for a full exhau...
05/05/2026

🔥 Next-Gen Ranger V6 Diesel Upgrade Done Right 🔥

We recently had a next-gen Ranger V6 diesel in the shop for a full exhaust upgrade — and the results speak for themselves.

✔️ Custom-built 76mm 304 stainless steel exhaust system (front to back)
✔️ Catalytic converter removed for improved airflow and performance
✔️ Professionally tuned by ATM Chiptuning Garden Route

The outcome? Better performance, improved sound, and a serious upgrade in driving experience.

💥 Want the same for your car or bakkie?
Get in touch with us today — we’ll help you unlock your vehicle’s full potential.

📩 Message us now to book your upgrade!

💥💥 What's going on here? 👀👀Any guesses on what engine is going in? Let's hear what you guy's think we are busy cooking u...
05/05/2026

💥💥 What's going on here? 👀👀

Any guesses on what engine is going in?

Let's hear what you guy's think we are busy cooking up here. 💥💥💥

Address

24 Gericke Street
Mossel Bay
6500

Opening Hours

Monday 08:00 - 17:00
Tuesday 08:00 - 17:00
Wednesday 08:00 - 17:00
Thursday 08:00 - 17:00
Friday 08:00 - 16:00

Telephone

0825943106

Website

Alerts

Be the first to know and let us send you an email when Sniper Racing Mossel Bay posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share