Tek1 Pty Ltd

Tek1 Pty Ltd Tek1 Pty Ltd provides Structral Steel drafting service. Software used is Tekla. Competent with Fabsu We provide the following services.

Tek1 Pty Ltd has been one of the leading names in the industry known for its high quality house detailing. Having a large customer base in US and Australia, we pride ourselves in delivering highest standard of building information modelling services that create an impact and enhance the value of your home, office, shop floor and site. Our keen attention to detail and remarkable customer service he

lps in creating professional and accurate shop drawings. Applying the technological expertise and experience, we render precise drafting services. Our tools include Tekla Structures Version 14 to 19 and AutoCAD. Material Take Off
Structural Drafting
Structural Shop Drawings
Metal Works Detailing . Building Information Modelling For Feasible Building Plans

As we aim to resolve quality issues fast and effective, Tek1 have adopted the Toyota principle of Early Detection, Early Resolution system. Superior quality material take off services from Tek1 helps you to set a budget to complete job on time. At a fraction of cost, you can avail the potential benefits of material take off that not only reduce design conflicts but also increases the efficiency. Detecting the issues during the initial stage can save you from likelihood of errors in future. Our experts deliver cutting edge steel detailing services that would be required for a structural framework for any portion of steel construction, no matter how small or big the project is. Get in touch with Tek1 to avail the best quality services at lowest possible prices.

Trimble Connect ModelStreet AddressMIDDLE PARKStateVICTORIACountryAUSTRALIAEngineerArchitectModelerGANESH
23/06/2026

Trimble Connect Model

Street AddressMIDDLE PARKStateVICTORIACountryAUSTRALIAEngineerArchitectModelerGANESH

Trimble Connect ModelStreet AddressMIDDLE PARKStateVICTORIACountryAUSTRALIAEngineerArchitectModelerGANESH

Trimble Connect ModelSteel Detailing for Simple StructuresTek1 believes in KISS. When things are simple, we keep it that...
22/06/2026

Trimble Connect Model

Steel Detailing for Simple Structures

Tek1 believes in KISS. When things are simple, we keep it that way.

Simple for all parties

Street AddressNO 39 JARDINE STREET FAIRY MEADOWStateNSWCountryAUSTRALIAEngineerArchitectModelerRAJ

Trimble Connect ModelSteel Detailing for Simple StructuresTek1 believes in KISS. When things are simple, we keep it that way. Simple for all

Trimble Connect ModelExpert Stel Detailing of Simple StructuresWhen experts handle your Steel detailing work expect that...
22/06/2026

Trimble Connect Model

Expert Stel Detailing of Simple Structures

When experts handle your Steel detailing work expect that you get Zero Problems.

Fast Delivery also means, lower pricing many a times.

Street Address88 YALLAH ROAD, YALLAHStateNSWCountryAUSTRALIAEngineerArchitectModelerRAJ

Trimble Connect ModelExpert Stel Detailing of Simple StructuresWhen experts handle your Steel detailing work expect that you get Zero Problems.

Trimble Connect ModelGANTRY SIGNAGEShop drawings for SignagesSteel Detailing and shop drawings for Airport Gantries at T...
18/06/2026

Trimble Connect Model

GANTRY SIGNAGE

Shop drawings for Signages

Steel Detailing and shop drawings for Airport Gantries at Tullamarine Airport

SHOP DRAWINGS FOR SIGNAGES

Gantry Signage - Hanging

Expert Shop drawings from Tek1

Trimble Connect ModelGANTRY SIGNAGEShop drawings for SignagesSteel Detailing and shop drawings for Airport Gantries at Tullamarine Airport

What is the minimum pocket depth required for rebated coloumnsThe minimum washer size is 3 mm. This could be different. ...
27/04/2026

What is the minimum pocket depth required for rebated coloumns

The minimum washer size is 3 mm. This could be different. If nothing is mentioned use 3 mm.

The minimum bolt stick out should be 1 pitch. For M20 it is 2.5 mm. Use 10 mm stick out.

Also there is grout. Pockets when cast could be of different depths. Use design grout of 15 mm minimum.

The top of the bolt should be 35 mm below slab level to prevent concrete Cracking.

Hence to be practical use 100 mm pocket depth with a base plate thickness of 16 mm and bolt size of 20 mm.

What is the minimum pocket depth required for rebated coloumnsThe minimum washer size is 3 mm. This could be different. If nothing is mentioned use 3 mm.

With over 100,000 panels detailed for Sydney biggest builder via precast fabricator, Tek1 has seen all aspects of Apartm...
17/04/2026

With over 100,000 panels detailed for Sydney biggest builder via precast fabricator, Tek1 has seen all aspects of Apartment panels. We use a combination of tools like Tekla Structures, AutoCad, Revit to achieve the best results. As of today, TeklaStrucures is the dominant software. We have a team size of 40 detailers all using Tekla Structures.
Our experise covers all aspects of Tower type apartment panels, Columns, Reckli panels, Spandrels.
Our RFI #1 is comprehensive and addresses almost everything.
We are process driven capturing every potential problem with training, Custom software, and experience

With over 100,000 panels detailed for Sydney's biggest builder via precast fabricator, Tek1 has seen all aspects of Apartment panels

Trimble Connect ModelExpert Take Off Service from Tek1Mount Alvernia CollegeExpert MTO. Fast. Low Cost call us on.Expert...
17/04/2026

Trimble Connect Model

Expert Take Off Service from Tek1

Mount Alvernia College

Expert MTO. Fast. Low Cost call us on.

Expert Material Takeoff and Steel Estimation Services

Competitve pricing

Tel: 0425791837

Trimble Connect ModelExpert Take Off Service from Tek1Mount Alvernia CollegeExpert MTO. Fast. Low Cost call us on.Expert Material Takeof

Trimble Connect ModelMeticulous Care - Expertise alone not sufficentWith many many changes, Mulitple site meaures, point...
14/04/2026

Trimble Connect Model

Meticulous Care - Expertise alone not sufficent

With many many changes, Mulitple site meaures, point cloud data, unless the processes are good and the care is meticulous, the knowledge and expertise will not count

Street AddressATL StationStateNSWCountryAustraliaModelerGanesh Kumar

Trimble Connect ModelMeticulous Care - Expertise alone not sufficentWith many many changes, Mulitple site meaures, point cloud data, unles

When you first get into .net API programming - for AutoCAD plugins, you learn this cardinal rule: make sure the three Au...
12/04/2026

When you first get into .net API programming - for AutoCAD plugins, you learn this cardinal rule: make sure the three AutoCAD dlls you refer to have copy local set to false.

Why exactly is this the case? I couldn't find a better answer than the one offered by Fenton Webb. Here it is in full:


Take a second to look at the AcMgd.dll and AcDbMgd.dll in this folder…. Do you notice that they are much smaller than the ones in the AutoCAD installation folder? There is a big reason for this which is that since the 2010 release of the ObjectARX SDK, we have “liposuctioned” the managed reference DLL’s. I say “liposuctioned” because we literally sucked out the body of the code from each function in the assembly DLL. What we did to create these DLL’s was to actually ILDASM (MSIL disassemble) the original DLL’s, strip all the body code from them and then reassembled them using ILASM (MSIL assembler). OK, now why on earth would we do that, right?

When you first get into .net API programming - for AutoCAD plugins, you learn this cardinal rule: make sure the three AutoCAD dlls you refer to have copy local

Address

35 Bradstreet Road
Melbourne, VIC
3150

Opening Hours

Monday 8:30am - 5pm
Tuesday 8:30am - 5pm
Wednesday 8:30am - 5pm
Thursday 8:30am - 5pm
Friday 8:30am - 5pm

Website

Alerts

Be the first to know and let us send you an email when Tek1 Pty Ltd posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Tek1 Pty Ltd:

Shortcuts

Featured

Share