Next Electrical Solutions pty ltd

Next Electrical Solutions pty ltd Reliable sparkies for commercial, industrial, domestic, and data & communications jobs across Sunraysia. Trusted by Mildura Base Hospital, SuniTAFE & Raygen.

Future-proof electrical & comms solutions since 2020.

29/06/2026

When pilots rely on your work, there's no room for guesswork.

Mildura Airport trusts the NextES team to calibrate and maintain their airfield ground lighting. Precision tools. Live airside work. Compliance to the millimetre.
If our crew is cleared to work on an active runway, your commercial site is in safe hands.

Industrial fit-outs. Switchboard upgrades. Preventative maintenance. We do the work that has to be right the first time.

Trusted by Mildura locals since 2020.
Rated 5 ⭐️ on Google.

📞 Call us today on 0413 635 112.

08/04/2026

We’ve just wrapped up a lighting upgrade at Mildura Base Hospital.

This job kicked off with upgrading the existing boards to brand new NHP concept panels, plus an additional panel to house all communications, including security and BMS control. From there, we installed 7 new poles along the strip, fitted with cameras and high-quality street lighting built to last.

Another solid project delivered, and we appreciate the ongoing support from Mildura Base Hospital.

If you manage a facility and need a reliable electrical and communications partner, let’s have a chat.

Call us on +61 482 085 604 or reach out here: https://nextes.com.au/contact-us/

03/04/2026

We’re back at Sunraysia Residential Services Inc!

We’ve been on this site in stages running lighting and power circuits across both buildings, plus a full data setup for security cameras, TVs, and iPads. There’s a lot happening behind the walls on this one, and it all needs to tie in properly.

Today was about getting the lighting wrapped up, everything wired, tested, and ready to go. Next stop is final fit-off!

Got a commercial project coming up? Let’s get it sorted properly from day one.

Call us on +61 482 085 604 or reach out here: https://nextes.com.au/contact-us/


Garraway Developments

30/03/2026

Getting set for the week ahead.

Gear checked and loaded, team meeting done, site cleaned and ready to go. This is the part most people don’t see, but it’s what keeps our jobs running smooth and on time.

Special mention to our Site Supervisor Luna, keeping morale high, energy even higher, and making sure everyone stays on task.

If you want a team that shows up prepared and ready to get stuck in, give us a call on +61 482 085 604 or reach out here: https://nextes.com.au/contact-us/

25/03/2026

We recently fixed up some lights at the office, making sure their space looks sharp, runs safely, and is set up for how they work day to day.

While we were there, we caught up with Tim Aldridge for a quick property update on the Sunraysia market. It’s busy, with strong buyer activity and plenty of movement across the board.

If you’re trying to get into the market or thinking about selling, don’t wing it. Speak to Tim and Amanda at Mildura Property Advisers. They’re across what’s happening locally and can guide you on the right move based on your situation.

Good people, honest advice, and a team that’s in it every day.

Need electrical work done right the first time?
Call us on +61 482 085 604

11/03/2026

Out on site removing old illuminated signage.

We’re safely taking down outdated lit-up signs, with the team up in the scissor lift handling the removal.

First step is always isolating and disconnecting all power. Once we confirm everything’s dead and safe, we move into dismantling and removal. No shortcuts when it comes to working at heights and electrical.

If your shopfront signage needs upgrading, replacing or safely decommissioning, make sure it’s done properly.

📞 048 208 5604
Next Electrical Solutions

05/03/2026

Quick run to Rexel Mildura this morning.

We needed to replace a stack of 10 amp breakers, so we ducked in, grabbed quality Clipsal gear and got straight back on site. No cutting corners, no cheap parts, just components we trust to last.

When a breaker fails, it’s usually a sign something’s been under pressure. Swapping it out, using reputable brands makes all the difference to how your board performs long term.

Back on the tools, breakers replaced, job sorted.

If you’ve got circuits tripping or switchboard gear that’s past its prime, get it checked before it turns into a bigger issue.

📞 048 208 5604
Next Electrical Solutions

03/03/2026

Farm shed call-out..

Inside lights were working fine. Outside lights kept tripping and doing their own thing. Client also mentioned “funny switching” where turning one circuit on affected another. That’s never a good sign.

First step was checking the board. No help from the low quailty labelling, we eventually found the outside lights circuit had tripped. Reset it, tested it, but that only treats the symptom. Something caused it to trip in the first place.

Tracked it down to a dodgy light contactor in the switchboard. It wasn’t clicking in and out properly and had started to burn out. That’s why the switches weren’t working independently.

Replaced the faulty contactor, tested all circuits, and now everything runs as it should. Clean switching, no cross-over, no random trips.

If your shed, workshop or site has lights playing up or circuits not behaving properly, don’t ignore it.

📞 048 208 5604
Commercial and industrial electrical sorted properly.

26/02/2026

There’s a big difference between “cheap and cheerful” and gear that’s built to last.

We pulled out a low-cost imported breaker that had only been in for a year or two… already faulty and wouldn’t even hold its trip. That’s not just annoying, it’s a safety risk.

Side by side with trusted brands like Clipsal and Voltex, the difference is obvious. Quality components protect your switchboard, your appliances and your property long term. They’re built to handle real load, not just look the part.

If you’re not sure what’s sitting in your switchboard, it might be time for a proper check.

📞 048 208 5604
Give us a call and let’s make sure your electrical system is set up to last.

17/02/2026

Big venues don’t run on hope. They run on reliable systems.

As part of the Mildura Workers’ ongoing upgrades, we rolled in and installed new 3 phase outlets in the commercial kitchen to handle their new gear. No patch jobs. No band aid fixes. Just clean, compliant electrical work built to keep up when the heat’s on.

More power means smoother prep, faster turnaround and a kitchen that doesn’t miss a beat during the dinner rush. Patrons get quality meals without the wait. The club gets reliability where it counts.

If you’re upgrading equipment but haven’t looked at your electrical capacity, you’re playing with fire.

Ready to level up your venue?
Give us a call or send us a message and let’s get it sorted.
📞 048 208 5604

Address

75 7th Street
Mildura, VIC
3500

Telephone

+61413635112

Website

Alerts

Be the first to know and let us send you an email when Next Electrical Solutions pty ltd posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Next Electrical Solutions pty ltd:

Shortcuts

Share

Category